Commercial Door Hardware

Description Clear Anodized finish Cylinder Backset: 1-1/8" [28.6 mm] Case: Steel with corrosion-resistant plating. Measures 1" x 5-13/16" x depth [25.4 mm x147.6 mm x depth]. Depth varies by backset. Bolt Holdback: While bolt is held fully retracted, a...

Kwikset Dorian Lever For use on exterior doors where keyed entry and security is needed. Comes with 2 keys. Latch has 2 interchangeable faceplates. Round corner and square corner. ANSI/BHMA grade 3 certified. Latch has adjustable backset 2-3/8" to...

Passive Infrared Request to Exit Device Designed to reliably release magnetic locks Automatically cuts power to the lock, allowing the individual to exit without even realizing that the door is secured Request to Exit (REX) output Easily adjustable beam...

Features Active request to exit motion sensor UL 294 and ULC-S319 listed as an access control device Narrow activation zone is limited to door handle area Designed to eliminate cross-traffic activation Can not be deceived by placing objects under...

Features RT-1 Kit includes one channel receiver and two transmitters with mount and keychain RT-3 Kit includes three channel receivers, one transmitter with mount and keychain Receiver operates on 12 or 24VAC or VDC Maximum current draw 50mA Temperature...

Up to 7 inches (176 mm) read range Certain HID® and AWID® 125 kHz proximity protocols supported Cansec 37-bit Wiegand output or 26-bit Wiegand output Keypad or card Indoor/Outdoor use Built-in sonalert Four-state standard (red, green, amber...

Ideal for applications requiring a narrow keypad reader – ex: glass entrances where a mullion reader is more aesthetically pleasing Keypad + reader, based on the 125-kHz proximity (HAF like the 2-N-1 readers) Non-mechanical keys minimize wear and...

Features IR sensor detection range up to approximately 4" Dual color LED, red/green indicate active/inactive status Time delay settable from 1 to 35 seconds Single gang stainless steel, weather resistant, vandal resistant face plate Operates on 12 or...

BEA’s MS21 is the industry’s first low-profile touchless actuator plate utilizing capacitive technology for the activation of automatic doors. The hands-free MS21 includes a stainless steel faceplate and an illuminated LED mounting ring for...

Description Clear Anodized Cylinder Backset: 1-1/8″ Case is made of stainless steel with corrosion-resistant plating that measures 1″ x 6″ x depth (depth varies by backset) Straight bolt made of eight ply laminated stainless steel that...

Features Standard with 12 or 24VDC bi-color LED Backing bracket permits integration with any 1-1/4" [32mm] or 1-1/8" [28mm] mortise cylinder (not included) Additional switch position on backing bracket allows another switch to be activated by turning...

Features Narrow stile mullion mount with die cast zinc alloy housing Narrow stile 10-digit operation (10 digits plus * and # keys) Operates with card only, user code and card, or user code only Multiple outputs allow control of up to two devices (1000...