Power Supply Boards

Input 12 to 24 volt AC or DC operation (setting not required), (0.4A @ 12volt, 0.2A @ 24 volt current consumption with all relays energized). Power supply input options: a) One (1) common power input (board and lock power). b) Two (2) isolated power...

Input 12 to 24 volt AC or DC operation (setting not required), (0.6A @ 12volt, 0.3A @ 24 volt current consumption with all relays energized). Main fuse is rated at 10A. Power supply input options: a) One (1) common power input (board and lock...

Features Input 12VDC or 24VDC operation is selectable. Current Draw Stand by 3mA, Relay energized:40mA. Relay selectable relay activation at the start or end of the timing cycle. One(1) second momentary relay activation at the end of the timing...

Features Input Up to 28VAC or 28VDC operation @ 12A max. Outputs Eight (8) individually fused outputs Fuses rated @ 3.5/250V Surge suppression. LED Indicators Power LED indicator. Features Power ON/OFF switch Temperature Operating: 0° C...

Input 12VDC or 24VDC operation. Current draw: 15mA. Outputs 1A/120VAC or 2A/28VDC DPDT contacts. Temperature Operating -25ºC to 55ºC ( -13ºF to 131ºF). Storage -25ºC to 70ºC ( -13ºF to 158ºF). Relative...

Features Input 12 to 24 volts AC or DC operation Relay Form "C" relay contacts are rated 10A @ 120VAC/28VDC. Standby current: 10mA(relay off) 50mA (relay on). Features EE Prom memory protects against loss of programming due to power failure...

Features Input Input 24VAC or 24VDC. Output 12VDC output. 1A continuous supply current. Filtered and electronically regulated output. Built-in overload protection. Visual Indicators Power LED indicator. Features Modular connector/cable...

Features Filtered and electronically regulated output Built-in charger for sealed lead acid or gel type batteries Automatic witch over to stand-by battery when AC fails Circuit breaker battery protection 100% full load burn-in tested Thermal overload...

Features Converts a single DC Input into 4 or 8 Class 2 rated outputs for “C” denoted models. Class 1 wiring is required for “F” denoted models 9-28 VDC Operation Reverse polarity protected Available with glass fuses or PTC...